A high-performance solution for small and medium-sized businesses. Suitable for enterprises with moderate production load.
The specialized laser head with a thin nozzle Raytools PC 109 provides the option of cutting holes in the corners of pipes.
The design envisages continuous machine operation in 1-2 shifts.
The specialized laser head with a thin nozzle Raytools PC 109 provides the option of cutting holes in the corners of pipes.
The design envisages continuous machine operation in 1-2 shifts.
Specifications
| Tube machining area | 6000х220 mm |
| Outer diameter of round pipes | 20-220 mm |
| Cutting speed | 30 m/min |
| Laser source power | 1000-3000 W |
- 2 years warranty
- Start-up and commissioning
- Personnel training
- Linear motors
- Ukrainian producer
- 9 levels of service
Share:
Description
- Functional and cost-effective: the machine provides laser cutting of tubes with low investment and operating costs. Capable of cutting tubes up to 6 m long.
- The laser complex has from 2 to 4 (as an option) pipe supports in the zone after cutting, this allows cutting and perforating to obtain finished item 0.5 to 6 meters long (in the basic version – up to 2 meters long).
- The machine is loaded and controlled by 1 operator. The automated cam drive holds the pipes securely in the chucks, while the self-centralization system ensures easy clamping and high-precision cutting.
- Clear and precise cutting with the function of auto head cleaning. The function of automatic cleaning of the laser head nozzle at automatically set intervals extends the service life of the equipment and ensures clean and precise cuts.
Cutting
Labeling
Piercing
Vaporizing
Pneumatic system
LTR systems use a pipe support system not only in the processing zone, but also afterwards, which provides optional machining of pipes up to 6 m long. The pneumatic system delivers air, oxygen or inert gas to the cutting area from external main lines. High rigidity of the machine’s welded bed allows to achieve high accelerations in process of machining. A system of trays is provided for collecting the smallest parts.
Fiber laser
Emission is generated by ytterbium fiber laser with a modern optical scheme. The beam delivery system (optical fiber) does not require special maintenance, unlike the "flying optics" used in laser machines with CO2 laser, which significantly reduces the cost of machine operation. Focusing optical system is equipped with a non-contact capacitance sensor, which allows to automatically maintain a constant position of the cutter focus in relation to the sheet being machined and ensures high quality of cut
Modern software
The software covers the need for safety and workflow optimization. The system of protection against collision of the optical laser head with the cut-out parts improves the safety of the equipment operation. The laser system is equipped with a highly developed self-diagnostics system. Pressure is regulated by electronic control of the CNC system.
Specifications
Laser source
| Laser type | Ytterbium fiber |
| Beam delivery | optical fiber |
| Emission/cutting modes | pulse, continuous wave |
| Laser wavelength | 1064-1070 nm |
Cutting head
| Protective glass replacement system | cartridge |
| Focusing system | automatic |
| Gap control system | non-contact, automatic |
Characteristics of cutting
| Cut width (depending on material thickness) | 0,08-0,2 mm |
| Applied process gases | oxygen, nitrogen, argon, compressed air |
| Switching of cutting gas | automatic |
| Workpieces loading into the cutting work area | semi-automatic, manual |
| Unloading of finished products from the cutting area into a container | semi-automatic |
Parameters of machining workpieces
| Machinable profiles | Օ/□/0/L/U/T/H |
| Maximum size of machined tubes (workpieces), (min..max) | Ø 20 – 220 mm |
| Length of tubes (workpieces) (min ... max) | 500…6000 mm |
| Length of tubes (parts) after cutting (max, standard) | 2000 mm |
| Length of tubes (parts) after cutting (max, optional) | 6000 mm (optional) |
| Remaining tube length (min) | 150 mm |
| Weight of tubes (workpieces) (max) | 200 kg |
Motion system
| Kinematic scheme | X, Y: linear axes. V1 and V2 axes: synchronously working rotation coordinates, Z axis - vertical. U-axis - inclined axis (optional) |
| CNC system, drivers and motors. The inclined U axis. | ESA |
| X axis working motion stroke | 200 mm |
| Motion stroke of linear axis Y | 6000 mm |
| Z axis motion stroke | 200 mm |
| V1, V2 axes motion stroke | 360 °× n |
| U-axis incline angle (optional) | ± 50 ° |
| X,Y axes positioning precision | ± 0.03 mm |
| V1, V2 axes positioning precision | ± 2 min |
| Positioning precision | 0,001 mm |
| Contour precision | ± 0,03 mm |
| Gap control system | non-contact, automatic |
| Chucks | 4 cam chuck, self-centering, with automatic clamping/unclamping |
| Front/rear chuck clamp type | Pneumatic / Pneumatic |
| Number of workpiece holders | 3 |
| Number of finished part holders | 2 |
Software
| Part nesting on the virtual table | automatic/manual |
| Data formats | DXF, DWG, G-code |
| Data loading methods | Internet, local network, USB flash drive |
| Remote machine diagnostics | + |
General specifications
| Power supply voltage | 380, ±10%, 50 Hz, 3 phases |
A brief overview of the advantages you get
when using our machines
ARAMIS technological equipment has successfully proven itself at hundreds of enterprises and has gained positive reputation with the customers for its high quality, reliability and advanced service standards. Sophisticated systems help to optimize production processes, reduce the risk of defects and get the best results. To read about the functional advantages of our equipment, please follow the link
More details
Watch the machines in operation
We maintain the policy of being open to our customers, so you can get familiar with the machines’ operation before buying. Managers provide detailed pre-sale consultations, taking into account all the requirements for the equipment installation on your production site. In addition to the consultation, you can see the equipment in operation:
on the production site
at exhibitions
in the workshop
9 levels of service from ARAMIS
High-quality service is an integral component of the efficient work with our customers. That’s why we offer 9 levels of service at all stages of cooperation in order to support sustainable development of our customers’ businesses.
Over 250 manufacturers trust us
Review filter
- Industry
- Location
Sporttehnika Company LLC
Sporttehnika Company LLC
VN Lyver
Director
After three years of intensive operation, we have no complaints about the laser metal cutting system AFX-PRO-6000-1530 LD produced by ARAMIS. Any technical issues that arose during operation were promptly and professionally addressed by ARAMIS service team, both remotely and through on-site visits for routine maintenance.
We would like to express our gratitude to the company for providing high-quality equipment and plan to continue our productive cooperation in the future.
We would like to express our gratitude to the company for providing high-quality equipment and plan to continue our productive cooperation in the future.
DYMKOM company
DYMKOM company
DYMKOM products are recognized by Ukrainian consumers, primarily because of the high standards of metal marking. Laser equipment is used by the company for manufacturing of smoke evacuation systems. ARAMIS LTC75 was demonstrated in operation at DYMKOM production facility.
Candle Group Ukraine LLC
Candle Group Ukraine LLC
Roman Svistel
Director
Our company operates several laser complexes of the AFX-Base and AFX-PRO models produced by ARAMIS, with laser sources of 2 kW, 3 kW, and 4 kW, which were purchased in 2018, 2019, and 2021, respectively.
During the operation of the equipment, we are satisfied with its quality, timely support from the technical and service department, as well as the production characteristics of the products we obtain.
In turn, we are pleased with our cooperation and can confidently recommend the equipment of this manufacturer to others.
During the operation of the equipment, we are satisfied with its quality, timely support from the technical and service department, as well as the production characteristics of the products we obtain.
In turn, we are pleased with our cooperation and can confidently recommend the equipment of this manufacturer to others.
ETERA Furniture Accessories Factory
ETERA Furniture Accessories Factory
Samples of work
carbon steel 6 mm
stainless steel 1.5 mm
The customers who have viewed this product are also interested in
LTC-85
LTC-85 laser cutting machine
- Dimensions of the machining area1.5х3m
- Average laser beam power1.5-6 kW
- Maximum XY motion vector speed120 m/min
LTC-85 laser cutting machine
- Dimensions of the machining area1.5х3m
- Average laser beam power1.5-6 kW
- Maximum XY motion vector speed120 m/min
LTC-PRO
LTC-PRO laser cutting machine
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
LTC-PRO laser cutting machine
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
AFX-Base
AFX-Base laser machine
- Dimensions of the working area1.5×3m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion150 m/min
AFX-Base laser machine
- Dimensions of the working area1.5×3m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion150 m/min
AFX-PRO
AFX-PRO laser cutting machine
- Dimensions of the working area1.5х3m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion180 m/min
AFX-PRO laser cutting machine
- Dimensions of the working area1.5х3m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion180 m/min
AFX-PRO 4G
AFX-PRO 4G laser cutting machine
- Dimensions of the working area1.5×3m
- Average emission power4-20 kW
- Maximum vector speed of XY motion240 m/min
AFX-PRO 4G laser cutting machine
- Dimensions of the working area1.5×3m
- Average emission power4-20 kW
- Maximum vector speed of XY motion240 m/min
LTR-PRO-3D
LTR-PRO-3D laser tube cutting system
- Workpiece length6m
- External diameter of round pipes20-220mm
- Cutting speed40 m/min
LTR-PRO-3D laser tube cutting system
- Workpiece length6m
- External diameter of round pipes20-220mm
- Cutting speed40 m/min
- Laser beam power1.5-4 kW
These subjects might be of interest for you
28.09.2023
Used Laser Metalworking Machines: Conveniences and Risks in UkraineIn case of industrial equipment, the decision to purchase used equipment requires careful consideration. This is especially true for used laser cutting machines, a technological asset that can be a blessing or a curse depending on the specific circumstances.
05.08.2023
Metal cutting: outsource to contractors or use own machine?Advantages of ordering metal cutting services Provision of metal cutting services by a professional contractor can provide many advantages for the business. Here are some of the main ones: 1. Cost effectiveness: Outsourcing can be more cost-effective than purchasing of in-house equipment, especially for companies with small production volumes. It eliminates the need for expensive […]
04.07.2023
How to choose a laser machine for metal cutting?How to choose a laser machine for metal cutting? Owners of industrial enterprises for the manufacture of metal products are paying increasingly careful attention to laser machines for metal cutting, which feature versatility, reliability and high precision. That goes without saying: when purchasing such equipment, the question arises quite naturally – what characteristics of the […]
05.11.2023
How to maximize profits for manufacturers of metal products in 2023. Laser cutting of metalWhat is laser cutting of metals? Metal laser cutting is a process where a laser beam is applied to cut metal parts to a specific size and shape. This method of metal processing is the most precise and efficient compared to other cutting methods, such as plasma cutting or gas cutting.