| Dimensions of the machining area | 1300х900 mm |
| Average emission power (pulse/continuous wave) | 150-450 W/ 1500-3000 W |
| Z-axis motion stroke | 100 mm |
| Maximum XY motion vector speed | 120 m/min |
- 2-year warranty
- Startup and commissioning
- Personnel training
- Linear motor
- Ukrainian manufacturer
- 9 levels of service
The STC series of gantry laser systems is a smart and reliable solution designed for production facilities requiring high-precision cutting of small parts. What distinguishes this series is the combination in one machine of a compact machine that does not take up much space on the production floor and the exceptional nesting accuracy provided by linear motors.
The machine’s dimensions make it capable of fitting into any production premises and still be able to cut metal sheets sized 1300×900 cm. This makes it perfect for the companies specialized in the serial production of small parts and therefore ideal for the manufacturing in the industries like electrical engineering, microelectronics and instrumentation technology.
What really sets this laser system apart from other market peers are the linear drives that guide its motion along the XY plane and are capable of achieving an impressive maximum vector speed of 120 meters per minute. These exceptional technical specifications are the basis for the system’s high-precision cutting capabilities.
ARAMIS STC are supplied with Metalix software for efficient control of cutting processes, with many functions to increase the speed and quality of machining, for automated optimal nesting of parts on the sheet, for protection of the cutting head and for waste reduction. This intelligent software saves valuable time of the operator and reduces production costs significantly.
| Laser type | ytterbium fiber |
| Beam delivery | optical fiber |
| Emission/cutting modes | QCW quasi-pulse / CW continuous wave |
| Laser wavelength | 1064-1070 nm |
| Laser head manufacturer (base option) | Raytools |
| Protective glass replacement system | cartridge |
| Focusing system | automatic |
| Gap control system | non-contact, automatic |
| Positioning accuracy in X, Y axes | ±0.01 mm |
| Positioning resolution | 1 µm |
| Cut width (depending on material thickness) | 0.08-0.2 mm |
| Process gases used | oxygen, nitrogen, argon, compressed air |
| Switching of cutting gas | automatic |
| Kinematic scheme | gantry, fixed sheet |
| Drive | linear, direct |
| Motors | synchronous brushless linear motors |
| Maximum XY motion vector speed | 120 m/min |
| Dimensions of the working area | 1300x900 mm |
| Waste removal system | trays |
| Z-axis motion stroke | 100 mm |
| CNC system | ARAMIS CNC |
| Parts nesting on a virtual table | automatic/manual |
| Data formats | DXF, DWG, G-code |
| Data loading methods | Internet, local network, USB flash drive |
| Capability to set micro-bridges within the cutting contour | + |
| "FlyCut" machining | + |
| Automated tool radius compensation | + |
| Operator lockout capability | + |
| Table of processing parameters | + |
| Ability to modify/add processing parameters | + |
| Combined detail cutting with automatic cutting width compensation | + |
| Jump motion optimization | + |
| Obstacle avoidance | + |
| Inventory tracking of sheets, blanks, finished items and skeletons | + |
| Monitoring of processing and process parameters | + |
| Generation of reports, compilation of operator tasks | + |
| Remote diagnostics of the machine | + |
| Power supply voltage | 380V, ±10%, 50Hz, 3 phases |
METALIX Functions
Licensed software from Metalix is an integrated system with a post-processor that covers the entire CNC operation cycle and includes automation modules such as drafting, processing, nesting, post-processing, simulation, import, and export of work files.
Optimization of layouts for complex shapes.
Graphic simulation of operations, allowing for easy editing of control program codes while viewing processing results.
Automatic error-checking of control programs.
An option to convert finished control program codes back into drawings and simulate their processing.
Base deliver set
- Motion system:
- Support frame;
- X-Y coordinate system based on synchronous linear motors;
- Z-drive of cutting head motion;
- Pneumatic system;
- 1300х900 mm work table;
- Cabinet protection (hermetic zone);
- ARAMIS CNC system;
- Software: 1 Metalix license;
- Laser source;
- Raytools optical cutting head with autofocus;
- Cooling system;
- Spares and accessories kit;
- Technical documentation.
Additional options
- Степень отделения99.9%
- Dust box volume50 L
- Number of cassettes4
- Степень отделения99.9%
- Dust box volume50 L
- Number of cassettes4
- Requirements for the laser processing area
- A special foundation is not required for the laser system. The deviation of the floor surface (height discontinuity) under the area designated for the laser system in the horizontal plane over a length of 2 meters should not exceed 4 mm (according to SNiP 2.03.13-88 “Floors”);
- The size of the concrete pad should be at least the total area of the entire system, including additional equipment, with a depth of no less than 140 mm;
- The floor and walls of the room should not be a source of dust (especially cement plaster);
- The width of all passages between equipment or between equipment and walls of the room should be no less than 0.5 meters, and in some cases, no less than 1 meter;
- Requirements for energy supply
- Provide a five-wire three-phase industrial power grid for the laser system with a voltage of 380 V, with an acceptable deviation of +/-10%; frequency partially at 50 +/- 1 Hz, with acceptable electrical power consumption according to the system’s needs. The interphase balance should not exceed +2%. Quality standards for electrical energy according to GOST 13109-97;
- Provide the laser system with a three-phase voltage stabilizer to stabilize the voltage against possible fluctuations in the grid, which, in turn, will ensure uninterrupted and reliable operation of the laser system;
- Provide grounding for the laser system by connecting the machine’s grounding circuit to the grounding bolt using a wire with a cross-section of no less than 4 sq. mm.
- Climatic operating conditions:
Prepare the premises to maintain a stable temperature range for operation within +10°C to +32°C and a relative humidity of 80% (at a temperature of 20°C) without condensation formation, at an atmospheric pressure of 83.9-106.6 kPa (630-800 mm Hg);
Ensure the absence of active substances in the premises with the laser system;
Ensure temperature fluctuations during operation within +3°C.
- Requirements for the exhaust ventilation system:
The premises of the laser area should be equipped with exhaust ventilation to remove combustion products and technological dust with a total pressure of no less than 1950 Pa and a capacity of no less than 4250 m3/hour.
The laser system should be connected to the above-mentioned exhaust ventilation system via a ventilation duct or pipe with a diameter of 315 mm.
- Supply of process gas (for the cutting process):
For laser cutting, the following gases should be used: oxygen in cylinders (with 99.7% purity), nitrogen (with 99.97% purity), or an industrial network of dried compressed air (with a moisture content of no more than 0.005%, oil content of no more than 0.002%, not higher than class 4 cleanliness according to GOST 17433-80, and a pressure of no less than 14 bar;
The requirements for the operation and storage of cylinders should be based on safety rules for handling flammable (oxygen) and non-flammable (nitrogen, argon) gases that are accepted in the country where the system will be used.
- Supply of compressed air (for pneumatic equipment):
For auxiliary pneumatic assemblies of the laser system, clean and dried compressed air should be supplied through a pneumatic tube with internal and external diameters of 10 mm and 12 mm, respectively. The air should be purified according to DIN ISO 8573-1 standard, with oil content not exceeding 0.002%, moisture content not exceeding 0.005%, particle size up to 40 µm, no higher than class 4 cleanliness according to GOST 17433-80, at a pressure of 6…8 bar, and maximum losses of 0.5 l/min.
- Requirements for the cooling fluid of the laser technical complex’s cooling system:
Cooling fluid is distilled water;
The quality of distilled water in the cooling system (chiller) should meet ISO 22519:2019 standard, which recommends water quality after reverse osmosis, with hardness not exceeding 0.25 dH (4.45 ppm = 0.089 ml/liter) and an electrical conductivity not exceeding 50 µS/cm.
A brief overview of your advantages
when using our machines
See the machines in operation
on the production site
at exhibitions
in the workshop
9 levels of service from Aramis
Over 250 manufacturers trust us
- Industry
- Location
During the operation of the equipment, we are satisfied with its quality, timely support from the technical and service department, as well as the production characteristics of the products we obtain.
In turn, we are pleased with our cooperation and can confidently recommend the equipment of this manufacturer to others.
New products and bestsellers
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
- Dimensions of the working area1.5×3m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion150 m/min
- Dimensions of the working area1.5×3m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion150 m/min
- Dimensions of the working area1.5х3m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion180 m/min
- Dimensions of the working area1.5х3m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion180 m/min
- Dimensions of the working area1.5×3m
- Average emission power4-20 kW
- Maximum vector speed of XY motion240 m/min
- Dimensions of the working area1.5×3m
- Average emission power4-20 kW
- Maximum vector speed of XY motion240 m/min
- Workpiece length6m
- External diameter of round pipes20-220mm
- Cutting speed40 m/min
- Workpiece length6m
- External diameter of round pipes20-220mm
- Cutting speed40 m/min
- Laser beam power1.5-4 kW
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-20mm
- Maximum lift speed0.4 m/sec
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-20mm
- Maximum lift speed0.4 m/sec
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5 -20mm
- Maximum lift speed0.4 m/sec
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5 -20mm
- Maximum lift speed0.4 m/sec
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-12mm
- Maximum lift speed0.4 m/sec
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-12mm
- Maximum lift speed0.4 m/sec
These topics might be of interest for you
In case of industrial equipment, the decision to purchase used equipment requires careful consideration. This is especially true for used laser cutting machines, a technological asset that can be a blessing or a curse depending on the specific circumstances.
Advantages of ordering metal cutting services Provision of metal cutting services by a professional contractor can provide many advantages for the business. Here are some of the main ones: 1. Cost effectiveness: Outsourcing can be more cost-effective than purchasing of in-house equipment, especially for companies with small production volumes. It eliminates the need for expensive […]
How to choose a laser machine for metal cutting? Owners of industrial enterprises for the manufacture of metal products are paying increasingly careful attention to laser machines for metal cutting, which feature versatility, reliability and high precision. That goes without saying: when purchasing such equipment, the question arises quite naturally – what characteristics of the […]
What is laser cutting of metals? Metal laser cutting is a process where a laser beam is applied to cut metal parts to a specific size and shape. This method of metal processing is the most precise and efficient compared to other cutting methods, such as plasma cutting or gas cutting.