| Compressor types | TIDY 15, TIDY 20, TIDY 30 |
| Productivity in accordance with the compressor type | 1,04; 1,435; 2,75 m3/min. |
| Volume of the receiver, according to the type | 500, 500, 900 L |
DALGAKIRAN TIDY Compact are compact stationary screw-type compressors of small and medium capacity based on an oil-lubricated screw unit, equipped with a microprocessor control and monitoring system, made in a soundproof casing and mounted on a receiver (receiver is a part of the delivery set up to the TIDY 20 model including).
Productivity: from 0.25 to 6.4 m3 per minute.
- Components from European producers
- High-efficiency compressor unit
- Compact casing design
- Easy-to-access layout of components
- Extremely low noise level
- Simple and user-friendly control system
- High quality of the compressed air
Extra features:
- Drive system: V-belt drive or direct drive via an elastic clutch.
- “Tidy Compact” series compressors are delivered with compressed air filters and built-in dryer.
The compact, cost-effective and low-noise TIDY series compressors are the perfect solution to meet the key requirements presented by small and medium-sized companies: small footprint, good quality of compressed air and minimal maintenance costs.
| Main characteristics | TIDY 15 Compact | TIDY 20 Compact | TIDY 30 Compact |
| Recommended for laser systems with power, Watt | 1000; 1500; 2000 | 2000; 3000; 4000 | 4000; 6000; 8000 |
| Motor power, kW | 11 | 15 | 22 |
| Pressure, Atm | 14,5 | 14,5 | 14,5 |
| Productivity, m3 per minute | 1,04 | 1,435 | 2,75 |
| Volume of the receiver, L | 500 | 500 | 900 |
| Filtering parameters | |||
| Refrigerator-type dryer | DryairDK 40 | DryairDK 50 | DryairDK 60 |
| Filters | GO 150X&Y | GO 150X&Y | GO 150X&Y |
| Residual content of oils, mg/m3 | 0,01 | 0,01 | 0,01 |
| Residual solid particle size: up to, µm | 0,01 | 0,01 | 0,01 |
| General parameters | |||
| Noise level, dB | 69 | 69 | 69 |
| Specialized drainage system | + | + | + |
| Climatic version | УХЛ 4.1 ГОСТ 15150 | УХЛ 4.1 ГОСТ 15150 | УХЛ 4.1 ГОСТ 15150 |
| Weight, kg | 465 | 503 | 735 |
| Overall dimensions, L/W/H | 1800/650/1600 | 1800/650/1600 | 1800/650/1600 |
| Connection | G 3/4“ | G 3/4“ | G 1“ |
| Electric power supply | 380/50/3 | 380/50/3 | 380/50/3 |
New products and bestsellers
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-20mm
- Maximum lift speed0.4 m/sec
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-20mm
- Maximum lift speed0.4 m/sec
- Dimensions of the machining area1.5х3m
- Average laser beam power1.5-6 kW
- Maximum XY motion vector speed120 m/min
- Dimensions of the machining area1.5х3m
- Average laser beam power1.5-6 kW
- Maximum XY motion vector speed120 m/min
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
- Dimensions of the working area1.5×3m
- Average emission power4-20 kW
- Maximum vector speed of XY motion240 m/min
- Dimensions of the working area1.5×3m
- Average emission power4-20 kW
- Maximum vector speed of XY motion240 m/min
- Workpiece length6m
- External diameter of round pipes20-220mm
- Cutting speed40 m/min
- Workpiece length6m
- External diameter of round pipes20-220mm
- Cutting speed40 m/min
- Laser beam power1.5-4 kW
- Max sheet size1.5×3 m
- Metal thickness0,5-6 mm
- Maximum lifting / lowering speed0.4 m/sec
- Max sheet size1.5×3 m
- Metal thickness0,5-6 mm
- Maximum lifting / lowering speed0.4 m/sec
- Laser sourceRaycus
- Laser source power20, 30, 50 W
- Engraving area100х100; 200х200 mm
- Laser sourceRaycus
- Laser source power20, 30, 50 W
- Engraving area100х100; 200х200 mm
You might also be interested in these subjects
How to choose a laser machine for metal cutting? Owners of industrial enterprises for the manufacture of metal products are paying increasingly careful attention to laser machines for metal cutting, which feature versatility, reliability and high precision. That goes without saying: when purchasing such equipment, the question arises quite naturally – what characteristics of the […]
In case of industrial equipment, the decision to purchase used equipment requires careful consideration. This is especially true for used laser cutting machines, a technological asset that can be a blessing or a curse depending on the specific circumstances.
Advantages of ordering metal cutting services Provision of metal cutting services by a professional contractor can provide many advantages for the business. Here are some of the main ones: 1. Cost effectiveness: Outsourcing can be more cost-effective than purchasing of in-house equipment, especially for companies with small production volumes. It eliminates the need for expensive […]
What is laser cutting of metals? Metal laser cutting is a process where a laser beam is applied to cut metal parts to a specific size and shape. This method of metal processing is the most precise and efficient compared to other cutting methods, such as plasma cutting or gas cutting.
DALGAKIRAN TIDY Compact compressors are compact stationary screw-type compressors of small and medium capacity based on oil-lubricated screw unit, equipped with microprocessor control and monitoring system, made in soundproof casing and mounted on receiver (receiver included up to and including TIDY 20 model).
Productivity: 0.25 to 6.4 m3/min.
- European components
- High efficiency compressor unit
- Compact casing design
- Easy-to-access layout of components
- Extremely low noise level
- Simple and user-friendly control system
- High quality of compressed air
Additional options:
- Drive system: V-belt drive or direct drive via elastic clutch.
- Tidy Compact -series compressors are supplied with integrated dryer and compressed air filters.
The compact, cost-effective and low-noise TIDY compressors are the perfect solution to meet the key needs of small and medium-sized companies: small footprint, good compressed air quality and minimal maintenance costs.