Ukraine
en
en
phone +38 096 0000 725

LTC-PRO laser cutting machine

<
>
LTC-PRO laser cutting machine
LTC-PRO laser cutting machine 1_1
LTC-PRO laser cutting machine 1_2
LTC-PRO laser cutting machine 2_1
LTC-PRO laser cutting machine 2_2
LTC-PRO laser cutting machine 2_3
LTC-PRO laser cutting machine
LTC-PRO series laser cutting machine is one of the most efficient solutions for small and medium-sized businesses. This series is a high-performance and reliable tool designed for high-precision cutting of sheet material. The gantry mechanism of the laser machine is realized on a linear drive, which provides high metalworking precision along with maximum reliability of the motion system.
Specifications
Working area dimensions2000х6000 mm
Average emission power2000-6000 W
Z-axis stroke150 mm
Maximum vector speed of XY motion120 m/min
Order now Watch in operation
Financing conditions
Catalogs
  • 2 years warranty
  • Start-up and commissioning
  • Personnel training
  • Linear motor
  • Ukrainian producer
  • 9 levels of service
Share:
Description

LTC series gantry laser systems are cost-efficient and stable tools for small and medium-sized production. The special feature of this series is the optimal price-to-quality ratio, they are affordable laser machines based on linear motors.

  • The LTC-PRO model has a number of improved parameters that significantly increase the machine’s productivity. High quality of the material machining is combined with the overall cost-effectiveness.
  • Linear drives in the XY plane axes have a maximum vector speed of 120 m/min, i.e. this system can cut more parts in shorter time.
  • In the base configuration LTC-PRO is equipped with a Raycus or IPG-Photonics laser source and a single-pallet table with a larger machining field (2×6 meters) compared to the previous model. This enables processing of a larger area and getting more units of output at the end of the process.
  • ARAMIS CNC system has gained a positive reputation in the world. And the CutControl software has the foresight to provide both automatic and manual part layout functions. This allows for automatic part nesting on the sheet, which optimizes cutting and reduces the  amount of waste, saves operator’s time and significantly reduces the cost of finished products.
icon 27
Cutting
icon 28
Labeling
icon 29
Piercing
icon 30
Vaporizing
precision long 02
Precision cutting
The laser emission of the machine is generated by an ytterbium fiber laser with a modern optical scheme. The high cutting accuracy (0.01 mm) significantly simplifies the further assembly process of finished products, improves the exterior view and reduces post-processing costs. Products made on this machine do not require additional post-processing
durability long 02
Long service life
Cutting accuracy does not deteriorate over time thanks to synchronous linear motors. Linear motors, in contrast to classic rack-and-pinion motion systems, do not involve the conversion of rotary motion into linear form, so there is no mechanical wear of parts and no loss of cutting accuracy even after 5-10 years of machine operation. The use of a linear drive significantly increases the dynamics characteristics of the system, which provides an increase in productivity and improves other qualitative indicators in general
execution long 02
Cost-effective and easy to operate
The software provides for both manual and automatic nesting of parts on the sheet. The software-assisted calculation reduces the amount of waste, saves operator’s time and reduces the cost of finished products. In addition, the software allows for processing and execution of job files, change of technological parameters, self-diagnostics and auto set-up. Preparation of the machine for cutting is automated and does not require special skills or additional control by the operator.
maximize longe 02
Wide application functionality
Laser systems perform cutting and engraving functions. Laser metal cutting equipment can machine a wide range of alloys. Laser cutting of non-ferrous materials including copper, brass, aluminum is performed without any restrictions. The software allows you to set-up the technological engraving with a specific algorithm. This feature greatly helps in the process of identification and sorting of parts
Characteristics
Laser source
Laser source typeytterbium fiber
Beam deliveryoptical fiber
Emission/cutting modespulse, continuous wave
Laser wavelength1064-1070 nm
Cutting head
Protective glass replacement systemcartridge
Focusing systemautomatic
Gap control systemnon-contact, automatic
Precision parameters
Positioning accuracy in X, Y axes±0.01 mm
Positioning resolution1 µm
Characteristics of cutting
Cut width (depending on the material thickness)0,08-0,2 mm
Applied process gasesoxygen, nitrogen, argon, compressed air
Switching of cutting gasautomatic
Motion system
Kinematic schemegantry, fixed sheet
Drivelinear, direct
Motorssynchronous brushless linear motors
Maximum vector speed of XY motion120 m/min
Working area dimensions2000x6000 mm
Waste removal systemtrays
Z axis motion stroke150 mm
Software
CNC SystemARAMIS CNC
Parts nesting on the virtual tableautomatic/manual
Data formatsDXF, DWG, G-code
Data loading methodsInternet, local network, USB flash drive
Capability to set micro-bridges within the cutting contour+
Cutting with "FlyCut" method+
Automatic tool radius compensation+
Operator lockout capability+
Table of processing parameters+
Possibility to modify/add modes+
Combined detail cutting with automatic cutting width compensation+
Jump motions optimization+
Obstacle avoidance+
Tracking and storage of sheets, blanks, parts, and skeletons+
Monitoring of processing and process parameters+
Compilation of reports and operator's tasks+
Remote machine diagnostics+
General specifications
Power supply voltage380V, ±10%, 50Hz, 3 phases
Software
machin control 01
METALIX
Control programs compilation
program hard 02
Aramix CutControl
Machine control system
snc 01
ARAMIS CNC
CNC system

Licensed software from Metalix is an integrated system with a post-processor, it covers the entire CNC operations cycle and includes such automation modules as drawings, processing, nesting of blanks, postprocessor, simulation, importing and exporting of job files.

The system modules cover the entire range of production needs
Their core function is to optimize and automate the relevant processes. That is, to improve production performance and make the operator's work easier.
System capabilities
The software supports files from any CAD system: Compass, AutoCAD, ArchiCAD, etc.


Optimizes the nesting layout of high complexity contours. Graphical work simulation allows easy editing of the control program codes when viewing the results of machining.

The control application is automatically checked for errors.

An option is provided to convert finished control program codes back into the drawing and simulate the respective processing.
Adaptability
The software is fully compatible with Windows operating systems in many languages, including support for Ukrainian, English and other languages. In addition, it is compatible with equipment of all leading world peers, such as Bystronic, Trumpf, Amada, LVD, Finn-Power, etc.
Delivery set

Base delivery kit

  1. Motion system
    • Support frame;
    • X-Y coordinate system based on synchronous linear motors; 
    • Z-drive of cutting head motion;
    • Schneeberger guiderails;
    • Pneumatic system;
    • 2000x6000mm work table;
    • Cabinet protection (hermetic zone).
  2. ARAMIS CNC system;
  3. Technologist’s software: 1 Metalix license;
  4. Laser source with power supply unit;
  5. Optical cutting head with autofocus;
  6. Cooling system: ARAMIS ChLC chiller.

Extra options

ProLoader: automatic sheet loading system
ProLoader
ProLoader: automatic sheet loading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5-20mm
  • Maximum lift speed
    0.4 m/sec
Get a price quote More details
ProLoader: automatic sheet loading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5-20mm
  • Maximum lift speed
    0.4 m/sec
NEW
CassetteLoader cassette loading system
CassetteLoader
CassetteLoader cassette loading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5-12mm
  • Maximum lift speed
    0.4 m/sec
Get a price quote More details
CassetteLoader cassette loading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5-12mm
  • Maximum lift speed
    0.4 m/sec
Prolifter automatic sheet loading and unloading system
Prolifter
Prolifter automatic sheet loading and unloading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5 -20mm
  • Maximum lift speed
    0.4 m/sec
Get a price quote More details
Prolifter automatic sheet loading and unloading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5 -20mm
  • Maximum lift speed
    0.4 m/sec
DALGAKIRAN TIDY screw-type compressor
DALGAKIRAN TIDY
DALGAKIRAN TIDY screw-type compressor
Get a price quote More details
DALGAKIRAN TIDY screw-type compressor
Maximum thickness of material

Maximum thickness of the material that can be cut

Матеріали: Н – stainless steel; А – aluminum; Ч – carbon steel.

*Color intensity corresponds to cutting speed and quality.

Thickness, mmМатеріалSpeed (m/min)Gas
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Structural steel9991010111111О2
25,65,76666,56,56,5
33,23,53,73,83,84,24,24,2
4333,33,43,43,83,83,8
52,52,833,23,23,73,73,7
62,32,52,72,82,83,33,33,3
81,41,61,82,52,52,72,72,7
101,21,21,31,42,12,32,32,3
1211111,4222
14 0,80,80,80,81,81,81,8
16  0,70,80,81,61,61,6
18  0,70,70,71,41,41,4
20   0,60,61,21,21,4
25     0,711,2
30      0,71

 

Thickness, mmMaterialSpeed (m/min)Gas
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Stainless steel

Materials: Н – stainless steel; А – aluminum; Ч – carbon steel.

*Color intensity corresponds to cutting speed and quality.

Thickness, mmMaterialSpeed (m/min)Газ
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Structural steel9991010111111О2
25,65,76666,56,56,5
33,23,53,73,83,84,24,24,2
4333,33,43,43,83,83,8
52,52,833,23,23,73,73,7
62,32,52,72,82,83,33,33,3
81,41,61,82,52,52,72,72,7
101,21,21,31,42,12,32,32,3
1211111,4222
14 0,80,80,80,81,81,81,8
16  0,70,80,81,61,61,6
18  0,70,70,71,41,41,4
20   0,60,61,21,21,4
25     0,711,2
30      0,71

 

Thickness, mmMaterialSpeed (m/min)Gas
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Stainless steel2530353540505050N2
21012202030353545
34,568915252540
42,63,24,55,512202230
51,61,834,57,8131622
60,9123,26101218
8 0,61,21,93,57812
10  0,81,32,15610
12   0,81,5458
14    1346
16    0,822,65
18    0,51,423,2
20     11,63
25     0,611,5
30      0,61

 

Thickness, mmMaterialSpeed (m/min)Gas
IPG 3KWIPG 4KWIPG 6KWIPG 8KW
1Aluminum40405060Air
220203035
388,21220
445,51015
52,83,8812
61,82,45,510
81,11,235
100,90,91,52
12 0,711
14 0,50,80,8

 

Materials: Н – stainless steel; А – alumium; Ч – carbon steel.

*Color intensity corresponds to cutting speed and quality.

Thickness, mmMaterialSpeed (m/min)Gas
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Structural steel9991010111111О2
25,65,76666,56,56,5
33,23,53,73,83,84,24,24,2
4333,33,43,43,83,83,8
52,52,833,23,23,73,73,7
62,32,52,72,82,83,33,33,3
81,41,61,82,52,52,72,72,7
101,21,21,31,42,12,32,32,3
1211111,4222
14 0,80,80,80,81,81,81,8
16  0,70,80,81,61,61,6
18  0,70,70,71,41,41,4
20   0,60,61,21,21,4
25     0,711,2
30      0,71

 

Thickness, mmMaterialSpeed (m/min)Gas
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Stainless steel2530353540505050N2
21012202030353545
34,568915252540
42,63,24,55,512202230
51,61,834,57,8131622
60,9123,26101218
8 0,61,21,93,57812
10  0,81,32,15610
12   0,81,5458
14    1346
16    0,822,65
18    0,51,423,2
20     11,63
25     0,611,5
30      0,61

 

Thickness, mmMaterialSpeed (m/min)Gas
IPG 3KWIPG 4KWIPG 6KWIPG 8KW
1Aluminum40405060Air
220203035
388,21220
445,51015
52,83,8812
61,82,45,510
81,11,235
100,90,91,52
12 0,711
14 0,50,80,8

 

Materials: Н – stainless steel; А – Aluminum; Ч – carbon steel.

*Color intensity corresponds to cutting speed and quality.

Товщина, ммMaterialSpeed (m/min)Gas
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Structural steel9991010111111О2
25,65,76666,56,56,5
33,23,53,73,83,84,24,24,2
4333,33,43,43,83,83,8
52,52,833,23,23,73,73,7
62,32,52,72,82,83,33,33,3
81,41,61,82,52,52,72,72,7
101,21,21,31,42,12,32,32,3
1211111,4222
14 0,80,80,80,81,81,81,8
16  0,70,80,81,61,61,6
18  0,70,70,71,41,41,4
20   0,60,61,21,21,4
25     0,711,2
30      0,71

 

Thickness, mmMaterialSpeed (m/min)Газ
IPG 1,5KWIPG 2KWIPG 3KWIPG 4KWIPG 6KW

IPG 12KW

IPG 15KW

IPG 20KW

1Stainless steel2530353540505050N2
21012202030353545
34,568915252540
42,63,24,55,512202230
51,61,834,57,8131622
60,9123,26101218
8 0,61,21,93,57812
10  0,81,32,15610
12   0,81,5458
14    1346
16    0,822,65
18    0,51,423,2
20     11,63
25     0,611,5
30      0,61

 

Thickness, mmMaterialSpeed (m/min)Gas
IPG 3KWIPG 4KWIPG 6KWIPG 8KW
1Aluminum40405060Air
220203035
388,21220
445,51015
52,83,8812
61,82,45,510
81,11,235
100,90,91,52
12 0,711
14 0,50,80,8

 

Stainless steel

2530353540505050N2
21012202030353545
34,568915252540
42,63,24,55,512202230
51,61,834,57,8131622
60,9123,26101218
8 0,61,21,93,57812
10  0,81,32,15610
12   0,81,5458
14    1346
16    0,822,65
18    0,51,423,2
20     11,63
25     0,611,5
30      0,61

 

Thickness, mmMaterialSpeed (m/min)Газ
IPG 3KWIPG 4KWIPG 6KWIPG 8KW
1Aluminum40405060Air
220203035
388,21220
445,51015
52,83,8812
61,82,45,510
81,11,235
100,90,91,52
12 0,711
14 0,50,80,8

 

Operating conditions

Operating conditions

  1. Requirements to the workshop premises
    • The system doesn’t require a special basement. The deviation (level difference) of the floor surface (height discontinuity) under the area designated for the laser system in the horizontal plane over a length of 2 meters should not exceed 4 mm (according to Construction Standards and Regulations SNiP 2.03.13-88 “Floors”);
    • If the conditions described above are not met, then the following steps shall be taken: the size of the concrete pad should be at least the total area of the entire system, including additional equipment, with a depth of no less than 140 mm;;
    • The floor and walls of the room should not be a source of dust (especially cement plaster dust);
    • Width of all passages between equipment or between equipment and walls of the workshop should be no less than 0.5 meters, and in some cases, no less than 1 meter;
  2. Requirements for power supply
    • The system shall be plugged to 5-wire 3-phase industrial electric power grid of 380V with acceptable deviation of +-10%; partially 50 +- 1Hz with acceptable power consumption in accordance with the system’s needs. Interphase balance shall be no more than +2%. Electric power quality standards shall comply with the state standard GOST ГОСТ 13109-97;
    • The system shall be equipped with a three-phase voltage stabilizer to stabilize the voltage against possible swings in the network, which in turn will ensure uninterrupted and reliable operation of the machine;
    • The system shall be equipped with earthing. That is, connect the earthing circuit of the machine with a cable to the earthing bolt. The cable cross-section must be at least 4 sq. mm.
  3. Climate conditions for operation:

    • Prepare the room to provide a stable temperature to ensure operation within the range of +10 to +32 C and relative humidity of 80% (at the temperature of 20 C) without condensate formation, at the atmospheric pressure of 83.9-106.6 kPa (630-800 mm Hg);

    • Make sure there are no active substances in the room with the system;

    • Temperature fluctuations during operation shall not exceed the limit of +3C

  4. Requirements to  the air extraction system:

    • The premises shall be equipped with exhaust ventilation to remove combustion products and process-generated dust with the total pressure of no less than 1950 Pa and the productivity of no less than 4250 m3/h.

    • The system must be connected to the aforesaid exhaust ventilation system with a 315 mm diameter ventilation hose or pipe.

  5. Supply of process gas (for cutting):

    • For laser cutting, the following should be used: oxygen in cylinders (99.7% purification), nitrogen (99.97% purification) or an industrial network of dried compressed air (water content not exceeding 0.005%, oil content not exceeding 0.002%, not worse than the 4th containment class according to state standard GOST 17433-80, pressure no less than 14 bar);

    • Requirements for the operation and storage of cylinders should be based on safety regulations for the handling of flammable (oxygen) and non-flammable (nitrogen, argon) gases, which are valid in the country in which the system is to be used.

  6. Technological air supply (for pneumatic equipment operation):

    • Supply of purified, dehumidified compressed air to the auxiliary pneumatic units of the laser complex by a pneumatic pipe with an internal and external diameter of 10 mm and 12 mm, respectively. Air purification in accordance with DIN ISO 8573-1: oils no more than 0.002%, water no more than 0.005%, particle size up to 40 microns, not worse than class 4 contamination according to state standard ДЕСТ 17433-80, pressure 6…8 bar, maximum losses 0.5 l/min.

  7. Requirements for the coolant of the machine’s cooling system:

    • Cooling liquid: distilled water;

    • The quality of distilled water in the cooling system (chiller) circuit shall comply with ISO 22519:2019 (recommended water quality – after reverse osmosis) with a hardness of no more than 0.25 dH ) = 4.45 ppm = 0.089 ml/liter and an electrical conductivity of no more than 50 μS/cm

A brief overview of the advantages you get
when using our machines

ARAMIS technological equipment has successfully proven itself at hundreds of enterprises and has gained positive reputation with the customers for its high quality, reliability and advanced service standards. Sophisticated systems help to optimize production processes, reduce the risk of defects and get the best results. Read about the functional advantages of our equipment here.
More details
man-10

LTC-PRO laser machine

Video review of the LTC-PRO laser machine
youtube Subscribe to the channel
20 pole6na2
play
Watch more videos

Watch the machines in work

man-02
We maintain the policy of being open to our customers, so you can familiarize yourself with the operation of the machines before making a purchase. Our managers provide detailed pre-sale consultations, taking into account all the requirements for installation of the equipment on your production site. In addition to the consultations, you can see the equipment in work:
  • img 07
    On the production site
  • img 08
    At exhibitions
  • img 09
    In the workshop
img 07
img 08
img 09

9 levels of service from ARAMIS

High-quality service is an integral component of the efficient work with our customers. That’s why we provide 9 levels of service at all stages of cooperation for the sustainable development of our customers’ business.
1
01
Financing
More details
2
02
Pre-sale service
More details
3
04 e1676297273268
Start-up and commissioning
More details
4
aramis navchannya
Training
More details
5
aramis texpidtrumka
Technical support
More details
6
007
Scheduled maintenance and repair
More details
7
service support 08
Modernization and trade-in
More details
8
09 e1676297822171
Spare parts and consumables
More details
9
mini optychna lab
Optics laboratory
More details

We are trusted by over 250 manufacturers

filters
Review filter
  • Industry
  • Location
orion logo
State Company “ORION” research institute
State Company “ORION” research institute
Audio feedback from State Company ""Orion" Research Institute" regarding the work of ARAMIS company’s service department after completion of equipment repair works.
kobzarenko logo
Kobzarenko plant
Kobzarenko plant
kobzarenka youtube ua
play
ICTV TV channel: How “Kobzarenko plant” uses ARAMIS equipment
eteraplast logo
ETERA Furniture Accessories Factory
ETERA Furniture Accessories Factory
Etera-Plast LLC specializes in the production of furniture components and fittings and is one of the largest domestic manufacturers in its industry. During our long-term collaboration with ARAMIS LLC, our company has purchased and successfully put into operation several types of equipment, including two metal laser cutting machines, LTC85-2000 and LTC85-1500, as well as four ARAMIS LWM laser welding machines.
Customer experience (scanned)
sporttehnyka logo
Sporttehnika Company LLC
Sporttehnika Company LLC
VN Lyver
Director
After three years of intensive operation, we have no complaints about the laser metal cutting system AFX-PRO-6000-1530 LD produced by ARAMIS. Any technical issues that arose during operation were promptly and professionally addressed by ARAMIS service team, both remotely and through on-site visits for routine maintenance.
We would like to express our gratitude to the company for providing high-quality equipment and plan to continue our productive cooperation in the future.
Customer experience (scanned)
More reviews

Samples of work

steel 1mm
aluminum 6mm
carbon steel 8-16mm
carbon steel 4mm
aluminum 3mm
carbon steel 14mm
<
>
man-02
More questions?

Assistance in selecting a machine

Please, fill out the form below and we'll call you back

New products and best sellers

LTC-85 laser cutting machine
LTC-85
LTC-85 laser cutting machine
  • Dimensions of the machining area
    1.5х3m
  • Average laser beam power
    1.5-6 kW
  • Maximum XY motion vector speed
    120 m/min
Get a price quote More details
LTC-85 laser cutting machine
  • Dimensions of the machining area
    1.5х3m
  • Average laser beam power
    1.5-6 kW
  • Maximum XY motion vector speed
    120 m/min
AFX-Base laser machine
AFX-Base
AFX-Base laser machine
  • Dimensions of the working area
    1.5×3m
  • Average laser beam power
    2-6 kW
  • Maximum vector speed of XY motion
    150 m/min
Get a price quote More details
AFX-Base laser machine
  • Dimensions of the working area
    1.5×3m
  • Average laser beam power
    2-6 kW
  • Maximum vector speed of XY motion
    150 m/min
AFX-PRO laser cutting machine
AFX-PRO
AFX-PRO laser cutting machine
  • Dimensions of the working area
    1.5х3m
  • Average laser beam power
    4-20 kW
  • Maximum vector speed of XY motion
    180 m/min
Get a price quote More details
AFX-PRO laser cutting machine
  • Dimensions of the working area
    1.5х3m
  • Average laser beam power
    4-20 kW
  • Maximum vector speed of XY motion
    180 m/min
AFX-PRO 4G laser cutting machine
AFX-PRO 4G
AFX-PRO 4G laser cutting machine
  • Dimensions of the working area
    1.5×3m
  • Average emission power
    4-20 kW
  • Maximum vector speed of XY motion
    240 m/min
Get a price quote More details
AFX-PRO 4G laser cutting machine
  • Dimensions of the working area
    1.5×3m
  • Average emission power
    4-20 kW
  • Maximum vector speed of XY motion
    240 m/min
NEW
CassetteLoader cassette loading system
CassetteLoader
CassetteLoader cassette loading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5-12mm
  • Maximum lift speed
    0.4 m/sec
Get a price quote More details
CassetteLoader cassette loading system
  • Maximum sheet dimensions
    1.5×3m
  • Metal thickness
    0.5-12mm
  • Maximum lift speed
    0.4 m/sec
AFX laser machine with an enlarged working area
AFX
AFX laser machine with an enlarged working area
  • Dimensions of the working area
    2×4; 2x6m
  • Average laser beam power
    4-20 kW
  • Maximum vector speed of XY motion
    150 m/min
Get a price quote More details
AFX laser machine with an enlarged working area
  • Dimensions of the working area
    2×4; 2x6m
  • Average laser beam power
    4-20 kW
  • Maximum vector speed of XY motion
    150 m/min
ARAMIS DFM desktop laser engraver
DFM
ARAMIS DFM desktop laser engraver
  • Laser source
    Raycus
  • Laser source power
    20, 30, 50 W
  • Engraving area
    100х100; 200х200 mm
Get a price quote More details
ARAMIS DFM desktop laser engraver
  • Laser source
    Raycus
  • Laser source power
    20, 30, 50 W
  • Engraving area
    100х100; 200х200 mm
<
>

You might also be interested in these topics

by obladnannya dlya rizku metalu
Різка
Галузеві рішення
28.09.2023
Used Laser Metalworking Machines: Conveniences and Risks in Ukraine

In case of industrial equipment, the decision to purchase used equipment requires careful consideration. This is especially true for used laser cutting machines, a technological asset that can be a blessing or a curse depending on the specific circumstances.

More details
garantiya 10
Різка
Галузеві рішення
05.08.2023
Metal cutting: outsource to contractors or use own machine?

Advantages of ordering metal cutting services Provision of metal cutting services by a professional contractor can provide many advantages for the business. Here are some of the main ones: 1. Cost effectiveness: Outsourcing can be more cost-effective than purchasing of in-house equipment, especially for companies with small production volumes. It eliminates the need for expensive […]

More details
afx base 1530ld 3kw raycus) + №342 Компрессор tidy 20 compact + МФР, ІНТЕЛКОМ, ТОВ м.Івано Франківськ 01.09.2023
Різка
Галузеві рішення
04.07.2023
How to choose a laser machine for metal cutting?

How to choose a laser machine for metal cutting? Owners of industrial enterprises for the manufacture of metal products are paying increasingly careful attention to laser machines for metal cutting, which feature versatility, reliability and high precision. That goes without saying: when purchasing such equipment, the question arises quite naturally – what characteristics of the […]

More details
aramis lazerna golovka rizannya
Різка
Галузеві рішення
05.11.2023
How to maximize profits for manufacturers of metal products in 2023. Laser cutting of metal

What is laser cutting of metals? Metal laser cutting is a process where a laser beam is applied to cut metal parts to a specific size and shape. This method of metal processing is the most precise and efficient compared to other cutting methods, such as plasma cutting or gas cutting.

More details
<
>
More articles

LTC-PRO series laser cutting machine is one of the most efficient solutions for small and medium-sized businesses. This series is a high-performance and reliable tool designed for high-precision cutting of sheet material. The gantry mechanism of the laser machine is based on a linear drive, which provides high processing accuracy along with the maximum reliability of the motion system.

 

Power of the supplied laser sources

Laser cutting machine

Laser source power, W

Max sheet thickness, mm (Steel 3)

LTC-PRO-2000

2000

Up to 14,0

LTC-PRO-3000

3000

Up to 18,0

LTC-PRO-4000

4000

Up to 20,0

LTC-PRO-6000

6000

Up to 25,0

LTC-PRO-12000

12000

Up to 30,0

Message sent. Thank you!
Send inquiry
Send inquiry
Send inquiry
Send inquiry
Send inquiry
Leave your feedback
Evaluate
Files
Leave a comment