The most advanced solution among laser systems.
Perfect solution for problems of mass serial production due to extremely high-speed cutting of repeatable parts made of thin metals.
The machine's mechanics open up to the full extent all capabilities of laser sources with the power of up to 20 kW.
Perfect solution for problems of mass serial production due to extremely high-speed cutting of repeatable parts made of thin metals.
The machine's mechanics open up to the full extent all capabilities of laser sources with the power of up to 20 kW.
Specifications
| Working area dimensions | 1500х3000 mm |
| Laser emission power | 4000-20000 W |
| Z axis motion stroke | 100 mm |
| Maximum vector speed of XY motion | 240 m/min |
- 2 years warranty
- Start-up and commissioning
- Personnel training
- Linear motor
- Ukrainian producer
- 9 levels of service
Share:
Description
AFX-series gantry-format laser systems provide industrial processes automation with improved functionality in each subsequent model. Robotization and optimization of repetitive actions is not just a trend in the industry, but also a confident step towards improving the product quality and increasing the number of customers. High-performance solution for large and medium-sized businesses.
- AFX-Pro 4G is the highest speed model in the AFX series with a wide range of application functionality. The system is designed for cutting and high-complexity contouring, engraving, and piercing of sheet metal. The maximum vector speed has been increased to 240 m/min.
- Perfect for mass series production of thin metal parts due to extremely high speed cutting and automation with double pallet table and conveyor system.
- The machine’s mechanics discover the possibility to fully utilize the capabilities of up to 15 kW laser sources. And the use of a drive based on synchronous linear motors guarantees quality for at least 5-10 years.
- Hermetic cabinet protection of the cutting works zone with the possibility to connect an external exhaust provides the first protection class against laser hazard in regular operation and provides an advanced on-site safety level for the maintenance personnel and operator.
Cutting
Labeling
Piercing
Vaporizing
Delicate and high-complexity cut even on thick metal
Owing to the capacity of machining in pulse mode along specially defined paths. The possibility of high-precision cutting of parts makes it possible to significantly simplify the process of assembling the finished products, and in some cases even to avoid the welding process, replacing it, for example, with a tongue-and-groove locking system. This allows to save time, money and human resources, and as a result to reduce the production cost
Precision cutting
The laser emission of the machine is generated by an ytterbium fiber laser with a modern optical scheme. The high cutting accuracy (0.01 mm) significantly simplifies the further process of assembling the finished products, improves product exterior and reduces post-processing costs. Products made on this machine do not require additional finish processing
Long service life
Cutting precision does not deteriorate over time thanks to synchronous linear motors. Linear motors, in contrast to classic rack-and-pinion motion systems, do not involve the conversion of rotary motion into linear form, so there is no mechanical wear of parts and no loss of cutting precision even after 5-10 years of the machine operation. Using the linear drive significantly improves the dynamic performance of the system, which provides an increase in productivity and other quality indicators in general.
Cost-effective and easy to operate
The software supports both manual and automatic nesting of parts on the sheet. Software-assisted calculation reduces the amount of waste, saves operator’s time and cuts down the cost of finished products. In addition, the software allows for processing and execution of job files, change of technological parameters, self-diagnostics and auto set-up. Preparation of the machine for cutting is automated and does not require special skills or additional control by the operator.
Wide application functionality
Laser systems perform cutting and engraving functions. Laser metal cutting equipment can machine a wide range of alloys. Laser cutting of non-ferrous materials including copper, brass, aluminum is performed without any restrictions. The software allows the operator to set-up the in-process engraving with use of a specific algorithm. This feature greatly helps in the process of parts identification and sorting.
Characteristics
Laser source
| Laser type | Ytterbium fiber |
| Beam delivery system | optical fiber |
| Emission/cutting modes | pulsse, continuous wave |
| Laser wavelength | 1064-1070 nm |
Cutting head
| Safety glass protection system | cartridge |
| Ficusing system | automatic |
| Gap control system | non-contact, automatic |
Precision parameters
| Precision of positioning in Х, Y axis | ±0.01 mm |
| Positioning resolution | 1 µm |
Cutting parameters
| Cut width (depending on material thickness) | |
| Applied process gases | oxygen, nitrogen, argon, compressed air |
| Switching of cutting gas | automatic |
Motion system
| Kinematic scheme | gantry, fixed sheet |
| Drive | linear, direct |
| Motors | synchronous brushless linear motors |
| Maximum vector speed of X,Y axes motion | 240 m/min |
| Working area dimensions | 1500x3000 mm |
| Table | dual-pallet automated shuttle table |
| Table replacement time | 16 sec |
| Waste removal system | trays |
| Z-axis motion stroke | 100 mm |
| Linear drive on axes | X, Y, Z |
Software
| CNC system | ARAMIS CNC |
| Parts nesting on the virtual table | automatic/manual |
| Data format | DXF, DWG, G-code |
| Data loading methods | Internet, local network, USB flash drive |
| Capability to set micro-bridges within the cutting contour | + |
| "FlyCut" cutting | + |
| Automatic tool radius compensation | + |
| Operator lockout capability | + |
| Table of processing parameters | + |
| Option to modify/add processing parameters | |
| Combined part cutting with automatic cut width compensation | + |
| Jump motion optimization | + |
| Obstacle avoidance | + |
| tracking and storage of sheets, blanks, parts, and skeletons | + |
| Visual monitoring of processing and process parameters | |
| Compilation of reports and operator tasks | + |
| Remote machine diagnostics | + |
General specifications
| Power supply voltage | 380, ±10%, 50Hz, 3 phases |
Software
METALIX
Control programs compilation
Aramix CutControl
Machine control system
ARAMIS CNC
CNC
METALIX funcions
Licensed software from Metalix – is an integrated system with a post-processor that covers the full cycle of CNC operations and includes such automation modules as drawing, processing, part layout, post-processor, simulation, import and export of work files.
System modules cover the whole range of production needs
Their main function is to optimize and automate the respective processes. That is, to improve production performance and simplify the operator’s work.
System capabilities
The software supports files from any CAD system: Compass, AutoCAD, ArchiCAD, etc.
Adaptability
The software is fully compatible with Windows operating systems in many languages, including Ukrainian, English and other languages. In addition, it is compatible with the equipment from all the world's leading peers, such as Bystronic, Trumpf, Amada, LVD, Finn-Power, etc.
Delivery set
Basic delivery kit
- Motion system
- Support frame;
- X-Y axes motion system based on synchronous linear motors;
- Z-axis cutter motion drive;
- Schneeberger guide rails;
- Pneumatic system;
- Work table 1500х3000mm;
- Cabinet protection (hermetic safety zone).
- ARAMIS CNC system;
- Technologist’s software: 1 Metalix license;
- Laser source with a power supply unit;
- Optical cutting head with autofocus;
- Cooling system: ARAMIS ЧЛК Chiller .
Extra options
ProLoader
ProLoader: automatic sheet loading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-20mm
- Maximum lift speed0.4 m/sec
ProLoader: automatic sheet loading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-20mm
- Maximum lift speed0.4 m/sec
NEW
CassetteLoader
CassetteLoader cassette loading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-12mm
- Maximum lift speed0.4 m/sec
CassetteLoader cassette loading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-12mm
- Maximum lift speed0.4 m/sec
Prolifter
Prolifter automatic sheet loading and unloading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5 -20mm
- Maximum lift speed0.4 m/sec
Prolifter automatic sheet loading and unloading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5 -20mm
- Maximum lift speed0.4 m/sec
DALGAKIRAN TIDY
DALGAKIRAN TIDY screw-type compressor
Maximum thickness
Max thickness of the metal that can be cut
Materials: Н – stainless steel; А – Aluminum; Ч – carbon steel.
*Color intensity corresponds to cutting speed and quality.
| Thickness, mm | Маterial | Speed (m/min) | Gas | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| IPG 1,5KW | IPG 2KW | IPG 3KW | IPG 4KW | IPG 6KW | IPG 12KW | IPG 15KW | IPG 20KW | |||
| 1 | Structural steel | 9 | 9 | 9 | 10 | 10 | 11 | 11 | 11 | О2 |
| 2 | 5,6 | 5,7 | 6 | 6 | 6 | 6,5 | 6,5 | 6,5 | ||
| 3 | 3,2 | 3,5 | 3,7 | 3,8 | 3,8 | 4,2 | 4,2 | 4,2 | ||
| 4 | 3 | 3 | 3,3 | 3,4 | 3,4 | 3,8 | 3,8 | 3,8 | ||
| 5 | 2,5 | 2,8 | 3 | 3,2 | 3,2 | 3,7 | 3,7 | 3,7 | ||
| 6 | 2,3 | 2,5 | 2,7 | 2,8 | 2,8 | 3,3 | 3,3 | 3,3 | ||
| 8 | 1,4 | 1,6 | 1,8 | 2,5 | 2,5 | 2,7 | 2,7 | 2,7 | ||
| 10 | 1,2 | 1,2 | 1,3 | 1,4 | 2,1 | 2,3 | 2,3 | 2,3 | ||
| 12 | 1 | 1 | 1 | 1 | 1,4 | 2 | 2 | 2 | ||
| 14 | 0,8 | 0,8 | 0,8 | 0,8 | 1,8 | 1,8 | 1,8 | |||
| 16 | 0,7 | 0,8 | 0,8 | 1,6 | 1,6 | 1,6 | ||||
| 18 | 0,7 | 0,7 | 0,7 | 1,4 | 1,4 | 1,4 | ||||
| 20 | 0,6 | 0,6 | 1,2 | 1,2 | 1,4 | |||||
| 25 | 0,7 | 1 | 1,2 | |||||||
| 30 | 0,7 | 1 | ||||||||
| Thickness, mm | Material | Speed (m/min) | Gas | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| IPG 1,5KW | IPG 2KW | IPG 3KW | IPG 4KW | IPG 6KW | IPG 12KW | IPG 15KW | IPG 20KW | |||
| 1 | Stainless steel | 25 | 30 | 35 | 35 | 40 | 50 | 50 | 50 | N2 |
| 2 | 10 | 12 | 20 | 20 | 30 | 35 | 35 | 45 | ||
| 3 | 4,5 | 6 | 8 | 9 | 15 | 25 | 25 | 40 | ||
| 4 | 2,6 | 3,2 | 4,5 | 5,5 | 12 | 20 | 22 | 30 | ||
| 5 | 1,6 | 1,8 | 3 | 4,5 | 7,8 | 13 | 16 | 22 | ||
| 6 | 0,9 | 1 | 2 | 3,2 | 6 | 10 | 12 | 18 | ||
| 8 | 0,6 | 1,2 | 1,9 | 3,5 | 7 | 8 | 12 | |||
| 10 | 0,8 | 1,3 | 2,1 | 5 | 6 | 10 | ||||
| 12 | 0,8 | 1,5 | 4 | 5 | 8 | |||||
| 14 | 1 | 3 | 4 | 6 | ||||||
| 16 | 0,8 | 2 | 2,6 | 5 | ||||||
| 18 | 0,5 | 1,4 | 2 | 3,2 | ||||||
| 20 | 1 | 1,6 | 3 | |||||||
| 25 | 0,6 | 1 | 1,5 | |||||||
| 30 | 0,6 | 1 | ||||||||
| Thickness, mm | Material | Speed (m/min) | Gas | |||
|---|---|---|---|---|---|---|
| IPG 3KW | IPG 4KW | IPG 6KW | IPG 8KW | |||
| 1 | Aluminum | 40 | 40 | 50 | 60 | Air |
| 2 | 20 | 20 | 30 | 35 | ||
| 3 | 8 | 8,2 | 12 | 20 | ||
| 4 | 4 | 5,5 | 10 | 15 | ||
| 5 | 2,8 | 3,8 | 8 | 12 | ||
| 6 | 1,8 | 2,4 | 5,5 | 10 | ||
| 8 | 1,1 | 1,2 | 3 | 5 | ||
| 10 | 0,9 | 0,9 | 1,5 | 2 | ||
| 12 | 0,7 | 1 | 1 | |||
| 14 | 0,5 | 0,8 | 0,8 | |||
Operating conditions
- Requirements to the premises for technological equipment placement
- For placement of the machine a special basement isn’t required. The level difference of the floor surface from the horizontal plane over a distance of 2 m may not exceed 4 mm (in accordance with SNiP Construction Standards and Rules 2.03.13-88 “Floors”) under the area for the laser system placement;
- Size of the concrete pad should be at least the total area of the entire system, including additional equipment, with a depth of no less than 140 mm;
- The floor and walls of the room may not be a source of dust (especially cement plaster dust);
- Width of all passages between units of the equipment or between the equipment and walls of the room (workshop) should be no less than 0.5 meters, and, in some cases, no less than 1 meter;
- Power supply specifications
- The system shall be plugged to 5-wire 3 phase industrial power grid The system shall be plugged to 5-wire 3 phase industrial power grid 400W with permissible deviation +-10%; 50+-1Hz frequency with permissible electric power consumption in accordance with the system’s needs. Inter-phase balance no more than +2%. Electric power quality in accordance with State Standard GOST 13109-97;
- The system shall be equipped with a three-phase voltage stabilizer for protection against possible swings in the network, which in turn will ensure uninterrupted and reliable operation of the machine;
- The system must be earthed: connect the earthing circuit of the machine with a cable to the earthing bolt. The cable cross-section must be at least 4 sq. mm.
- Operating microclimatic conditions:
- Prepare the premises to maintain a stable temperature to ensure operation within the range of +10 to +32 C and relative humidity of 80% (at the temperature of 20 C) without condensate formation, at the atmospheric pressure of 83.9-106.6 kPa (630-800 mm Hg);
- Make sure there are no active substances in the room where the system is placed;
- Temperature fluctuations during operation shall not exceed the limit of +3C
- Requirements to the air extraction system:
- The premises shall be equipped with exhaust ventilation to remove combustion products and process-generated dust with the total pressure of no less than 1950 Pa and the productivity of no less than 4250 m3/h.
- The system must be connected to the aforesaid exhaust ventilation system with a 315 mm diameter ventilation hose or pipe.
- Process gas supply (for the cutting process):
- For laser cutting, the following should be used: oxygen in cylinders (99.7% purity), nitrogen (99.97% purity) or an industrial network of dried compressed air must be available (water content not exceeding 0.005%, oil content not exceeding 0.002%, no worse than the 4th containment class according to State Standard GOST 17433-80, pressure no less than 14 bar);
- Requirements for the operation and storage of cylinders should be based on safety regulations for handling of flammable (oxygen) and non-flammable (nitrogen, argon) gases, which are valid in the country where the system is to be used.
- Utility air supply (for pneumatic equipment operation):
- Supply of purified, dehumidified compressed air to the auxiliary pneumatic units of the laser complex by a pneumatic pipe with an internal and external diameter of 10 mm and 12 mm, respectively. Air purification in accordance with DIN ISO 8573-1: oils no more than 0.002%, water no more than 0.005%, particle size up to 40 microns, not worse than class 4 contamination according in accordance with state standard DEST ДЭСТ 17433-80, pressure 6…8 bar, maximum losses: 0.5 l/min.
- Requirements to the cooled liquid of the machine’s cooling system:
- Cooling liquid: distilled water;
- The quality of distilled water in the cooling system (chiller) circuit shall comply with ISO 22519:2019 (recommended water quality – after reverse osmosis) with hardness of no more than 0.25 dH ) = 4.45 ppm = 0.089 ml/liter and electrical conductivity of no more than 50 μS/cm
A brief overview of the advantages you get
when using our equipment
ARAMIS technological equipment has successfully proven itself at hundreds of enterprises and has gained positive reputation with the customers for its high quality, reliability and advanced service standards. Sophisticated systems help to optimize production processes, reduce the risk of defects and get the best results. To find out more about the functional advantages of our equipment, please follow the link
More details
See the machines at work
We maintain the policy of being open to our customers, so you can get familiar with the machines’ operation before making a purchase. Managers provide detailed pre-sale consultations, taking into account all the requirements for the equipment installation on your production site. Besides the consultations, you can see the equipment in work:
on the production site
at exhibitions
in the workshop
9 levels of service provided by ARAMIS
High-quality service is an integral part of the efficient collaboration with our clients. That’s the reason why we provide 9 levels of service at all stages of cooperation in order to support sustainable development of our customers’ businesses.
We are trusted by over 250 manufacturers
Review filter
- Industry
- Location
ORION.GROUP LLC
ORION.GROUP LLC
Letter of Review
Our company, LLC ORION.GROUP, has been using the AFX-Base-400-2040LD laser cutting system since January 2022.
We chose the supplier based on the parameters of price-to-quality ratio, equipment configuration, and the availability of professional service provided by the manufacturer in close proximity to our production facilities.
During the period of operation, we have been fully satisfied with the level of support from the specialists of LLC ARAMIS and the quality of the equipment itself, which allows us to timely and efficiently manufacture the products for our customers.
We can confidently recommend the equipment by LLC ARAMIS.
Our company, LLC ORION.GROUP, has been using the AFX-Base-400-2040LD laser cutting system since January 2022.
We chose the supplier based on the parameters of price-to-quality ratio, equipment configuration, and the availability of professional service provided by the manufacturer in close proximity to our production facilities.
During the period of operation, we have been fully satisfied with the level of support from the specialists of LLC ARAMIS and the quality of the equipment itself, which allows us to timely and efficiently manufacture the products for our customers.
We can confidently recommend the equipment by LLC ARAMIS.
KhIMLABORREAKTIV for TM “EXPERT”
KhIMLABORREAKTIV for TM “EXPERT”
Thanks to ARAMIS laser equipment - model LTC75, KhIMLABORREACTIV produces high quality products (under its own brand EXPERT) for hospitals, laboratories and specialized educational institutions.
PJSC “UHL-MASH”
PJSC “UHL-MASH”
Private Joint Stock Company "UHL-MASH" is specialized in manufacturing of office furniture, laboratory and medical furniture and other products made of metal, such as equipment for vehicle maintenance stations, telecommunications and server equipment, safes, shelving, etc.
Due to the fact that in process of metal products manufacturing we use mainly thin metal sheets and it is more feasible to manufacture parts by laser cutting from the whole sheet, rather than by individual blanks, we decided to purchase a laser. Based on the results of a research of the laser equipment offered by the market, geography of manufacturers, price parameters, the final choice was made in favor of the fiber laser from the domestic manufacturer LLC "ARAMIS".
Due to the fact that in process of metal products manufacturing we use mainly thin metal sheets and it is more feasible to manufacture parts by laser cutting from the whole sheet, rather than by individual blanks, we decided to purchase a laser. Based on the results of a research of the laser equipment offered by the market, geography of manufacturers, price parameters, the final choice was made in favor of the fiber laser from the domestic manufacturer LLC "ARAMIS".
”HORIZONT” Ventilator plant
”HORIZONT” Ventilator plant
Feedback from Horizont ventilator plant regarding the work of Aramis service department (after scheduled maintenance of the equipment was carried out).
Finished work samples
The customers who have viewed this product are also interested in
LTC-85
LTC-85 laser cutting machine
- Dimensions of the machining area1.5х3m
- Average laser beam power1.5-6 kW
- Maximum XY motion vector speed120 m/min
LTC-85 laser cutting machine
- Dimensions of the machining area1.5х3m
- Average laser beam power1.5-6 kW
- Maximum XY motion vector speed120 m/min
LTC-PRO
LTC-PRO laser cutting machine
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
LTC-PRO laser cutting machine
- Dimensions of the working area2х6m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion120 m/min
AFX-Base
AFX-Base laser machine
- Dimensions of the working area1.5×3m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion150 m/min
AFX-Base laser machine
- Dimensions of the working area1.5×3m
- Average laser beam power2-6 kW
- Maximum vector speed of XY motion150 m/min
AFX-PRO
AFX-PRO laser cutting machine
- Dimensions of the working area1.5х3m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion180 m/min
AFX-PRO laser cutting machine
- Dimensions of the working area1.5х3m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion180 m/min
NEW
CassetteLoader
CassetteLoader cassette loading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-12mm
- Maximum lift speed0.4 m/sec
CassetteLoader cassette loading system
- Maximum sheet dimensions1.5×3m
- Metal thickness0.5-12mm
- Maximum lift speed0.4 m/sec
AFX
AFX laser machine with an enlarged working area
- Dimensions of the working area2×4; 2x6m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion150 m/min
AFX laser machine with an enlarged working area
- Dimensions of the working area2×4; 2x6m
- Average laser beam power4-20 kW
- Maximum vector speed of XY motion150 m/min
DFM
ARAMIS DFM desktop laser engraver
- Laser sourceRaycus
- Laser source power20, 30, 50 W
- Engraving area100х100; 200х200 mm
ARAMIS DFM desktop laser engraver
- Laser sourceRaycus
- Laser source power20, 30, 50 W
- Engraving area100х100; 200х200 mm
You might be interested to find out more about these subjects
28.09.2023
Used Laser Metalworking Machines: Conveniences and Risks in UkraineIn case of industrial equipment, the decision to purchase used equipment requires careful consideration. This is especially true for used laser cutting machines, a technological asset that can be a blessing or a curse depending on the specific circumstances.
05.08.2023
Metal cutting: outsource to contractors or use own machine?Advantages of ordering metal cutting services Provision of metal cutting services by a professional contractor can provide many advantages for the business. Here are some of the main ones: 1. Cost effectiveness: Outsourcing can be more cost-effective than purchasing of in-house equipment, especially for companies with small production volumes. It eliminates the need for expensive […]
04.07.2023
How to choose a laser machine for metal cutting?How to choose a laser machine for metal cutting? Owners of industrial enterprises for the manufacture of metal products are paying increasingly careful attention to laser machines for metal cutting, which feature versatility, reliability and high precision. That goes without saying: when purchasing such equipment, the question arises quite naturally – what characteristics of the […]
05.11.2023
How to maximize profits for manufacturers of metal products in 2023. Laser cutting of metalWhat is laser cutting of metals? Metal laser cutting is a process where a laser beam is applied to cut metal parts to a specific size and shape. This method of metal processing is the most precise and efficient compared to other cutting methods, such as plasma cutting or gas cutting.
Power of the supplied laser sources
Laser power, W | Maximum sheet thickness, mm (Steel3) |
4000 | Up to 20.0 |
6000 | Up to 25.0 |
12000 | Up to 30.0 |
15000 | Up to 30.0 |
Using the direct drive based on linear motors provides maximum precision, performance stability and high reliability.